Filter
Top Products
MV800 — Owner’s Manual
Frequency response (ZONE OUTPUT) 20Hz—20kHz 0+1dB, -3dB @+4dB, 600Ω (INPUT GAIN Control at minimum level)
Total harmonic distortion (ZONE OUTPUT) <0.1% (THD+N) @+14dB, 20Hz—20kHz, 600Ω
Hum & Noise -128dB Equivalent input noise
-97dB Residual output noise
-64dB (68dB S/N) ZONE OUT:
Master volume and one channel volume at nominal level.
-92dB (96dB S/N) ZONE OUT:
Master volume at nominal level, all channel assign switches
OFF.
Maximum voltage gain 60dB INPUT (MIC) to INSERT OUT
16dB INSERT IN to ZONE OUT
76dB INPUT (MIC) to ZONE OUT
66dB INPUT (MIC) to STACK OUT
10dB STACK IN to ZONE OUT
58.2dB INPUT (MIC) to REC OUT
23.8dB ST INPUT to ZONE OUT
76dB PAGING INPUT to ZONE OUT
Monaural input pad switch (LINE) 26dB
Monaural input gain control 44dB variable
Crosstalk at 1kHz -70dB adjacent input
-70dB input to output (CH INPUT)
-50dB between L and R (ST CH INPUT)
Monaural input equalizer’s characteristics ±15dB Maximum
HIGH 10kHz shelving
LOW 100Hz shelving
* Turn over/Roll off frequency of shelving: 3dB below maximum variable level.
Paging input pad switch (LINE) 26dB
Paging input gain control 44dB variable
Monaural input indicator PEAK (red): Each channel, the indicator will light when the post EQ signal
exceeds +17dB.
SIGNAL (green): Each channel, the indicator will light when the post EQ signal level
exceeds that of the noise gate’s threshold level.
Stereo input indicator PEAK (red): The indicator will light when the post buffer amp signal level exceeds
+17dB.
SIGNAL (green): The indicator will light when the post buffer amp signal level exceeds
-10dB.
Compressor indicator Orange: When the compressor is activated the indicator will light.
Stereo channel ducker indicator Orange: When the Stereo Channel Ducker is activated the indicator will light.
Paging indicator PEAK (red): The indicator will light when the post head amp signal level
exceeds +17dB.
SIGNAL (green): The indicator will light when the post head amp signal level
exceeds -10dB.
PAGING ON (Orange): When the ZONE Input Ducker is ON the indicator will light.
Level meters 5 points (PEAK, +6, 0, -5, -10) x 2, 0=+4dB ZONE OUT @600Ω
Phantom power +48V (balanced)
Accessories • Feet x 4
• 3-pin Euro-block connectors x 14
• Security Cover Set
(Security Cover, Post Screws x4, Set Screws x4)
Power supply USA and Canadian: 120V AC 60Hz
General: 230V AC 50Hz
Power consumption 45W
Dimensions (W x H x D) 479 x 88 x 325 mm (without accessories)
Weight 7.2kg
For European Model 0dB=0.775Vrms
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 7A
Conformed Environment: E1, E2, E3 and E4
Supplement 13
Supplement
Specifications
■ General specifications
(Rs=150Ω, 20Hz—20kHz, INPUT GAIN Control=Max.,
INPUT PAD=OFF, Input Sensitivity=-60dB)
* Measured with 12.7kHz, 6dB/oct. low pass filter.
(Equivalent to 20kHz, ∞dB/oct. filter.)