Filter
Top Products
MV800 — Owner’s Manual
Input
PAD
GAIN Input Nominal
Input level
Connector type
connectors
Control impedance impedance
Sensitivity *1 Nominal
Max. before clipping
MIC
MAX
50-600Ω
-72 dB (0.195mV) -60 dB (0.775mV) -40 dB (7.75mV)
CH INPUT
LINE
3kΩ
mics &
-46 dB (3.88mV) -34 dB (15.5mV) -14 dB (155mV)
XLR-3-31 type *2
(1-8)
MIC
MIN
600Ω lines
-28 dB (30.9mV) -16 dB (123mV) +4 dB (1.23V)
Euro-block connector *2
LINE -2 dB (0.616V) +10 dB (2.45V) +30 dB (24.5V)
ST INPUT [L, R] (A, B) 10kΩ 600Ω lines -22 dBV (79.4mV) -10 dBV (316mV) +10 dBV (3.16V) RCA phono jack *3
MIC
MAX
50-600Ω
-72 dB (0.195mV) -60 dB (0.775mV) -40 dB (7.75mV)
PAGING
LINE
3kΩ
mics &
-46 dB (3.88mV) -34 dB (15.5mV) -14 dB (155mV)
Euro-block connector *2
MIC
MIN
600Ω lines
-28 dB (30.9mV) -16 dB (123mV) +4 dB (1.23V)
LINE -2 dB (0.616V) +10 dB (2.45V) +30 dB (24.5V)
CH INSERT IN (1-8) 10kΩ 600Ω lines -12 dB (195mV) 0 dB (0.775V) +20 dB (7.75V) Phone jack (TRS) *2
STACK IN [ZONE1, ZONE2] 10kΩ 600Ω lines -6 dB (388mV) 0 dB (0.775V) +20 dB (7.75V) Phone jack (TRS) *3
14 Supplement
■ Input Specifications
*1 Input sensitivity: the lowest level that will produce the nominal output level when the unit is set to maximum gain.
*2 XLR type connector, Euro-block connector, phone jack (TRS) (T=Hot, R=Cold, S=Gnd): balanced type.
*3 RCA phono jack, phone jack (TRS) (T=ZONE 1, R= ZONE 2, S=Gnd): unbalanced type.
• 0dB=0.775Vrms, 0dBV=1Vrms
■ Output Specifications
Output connectors
Output Nominal
Output level
Connector type
impedance impedance
Nominal
Max. before clipping
ZONE 1 OUT [L, R]
150Ω 600Ω lines +4 dB (1.23V) +24 dB (12.3V)
XLR-3-32 type *1
ZONE 2 OUT [L, R] Euro-block connector *1
CH INSERT OUT (1-8) 150Ω 10kΩ lines 0 dB (0.775V) +20 dB (7.75V) Phone jack (TRS) *2
STACK OUT 150Ω 10kΩ lines 0 dB (0.775V) +20 dB (7.75V) Phone jack (TRS) *3
REC 1 OUT [L, R]
600Ω 10kΩ lines -10 dBV (316mV) +10 dBV (3.16V) RCA phono jack *4
REC 2 OUT [L, R]
PHONES 100Ω 40Ω phones 30mW 75mW Stereo phone jack (TRS) *5
*1 XLR type connector, Euro-block connector: balanced type.
*2 Phone jack (TRS) (T=Hot, R=Cold, S=Gnd): impedance balanced type.
*3 Phone jack (TRS) (T=ZONE 1, R=ZONE 2, S=Gnd): unbalanced type.
*4 RCA phono jack: unbalanced type.
*5 Stereo phone jack (TRS) (T=L, R=R, S=Gnd): unbalanced type.
• 0dB=0.775Vrms, 0dBV=1Vrms
Specifications are subject to change without prior notice.