Filter
Top Products
12
! [STORE] button
This button lets you store changes that you make to a
Performance, as well as copy the current Performance into any
Performance memory. The P-200 can store 24 Performances.
" [EDIT] button
This button lets you enter Edit mode and access the various Edit
functions. After pressing it once, the LED above the [EDIT]
button will begin blinking, as will the light above the currently
selected [EDIT SELECT] button %. Pressing it again will return
you to the previous Play mode.
# [PERF. A, B] buttons
These buttons let you enter Performance Play mode and select
any of the 24 Performances. The P-200 is set at the factory with
24 Preset Performances, but you can overwrite them and store
User Performances which you create yourself. The [PERF. A]
and [PERF. B] banks hold 12 Performances each, and a lit LED
above one of the buttons indicates the currently active bank.
$ [VOICE] button
This button lets you enter Voice Play mode by pressing [VOICE]
and then pressing a [VOICE SELECT] button %. A lit LED above
the [VOICE] button indicates you’re in Voice Play mode.
% [VOICE, PERFORMANCE, EDIT SELECT]
buttons
These 12 buttons each have multiple functions, depending on
the current mode. In Voice Play mode you can use them to
select any of the 12 preset AWM instrument voices you want to
play; the voice names are printed in above the buttons. In
Performance Play mode you can use them to select any of the
24 Performances (12 Performances per bank); the Performance
numbers are printed above the buttons. In Edit mode, you can
use them to select the Edit functions; the Edit function names
are printed in green below the buttons.
& [REVERB] button
This button lets you select either a Room, Stage or Hall reverb
effect, or no reverb effect, to apply to the currently selected
voice. Each voice has a default reverb setting preprogrammed at
the factory which you can change.
' [MODULATION] button
This button lets you select either a Chorus, Symphonic or
Tremolo modulation effect, or no modulation effect, to apply to
the currently selected voice. Each voice has a default modulation
setting preprogrammed at the factory which you can change.
( [EQUALIZER] sliders
These sliders let you graphically adjust the level of the sound
output of the P-200 in three bands: High, Middle and Low. In
Dual and Split modes, the changes you make will affect both
voices.
REVERB
MODULATION
ROOM
STAGE
HALL
CHORUS
SYMPHONIC
TREMOLO
EFFECT
LOW MIDDLE HIGH
EQUALIZER
INT.EQ
KBD SENS.
PB MW
NAMEPSCS FC
LOCAL
CHANNEL
PC TABLEMIDI FILTER
SYSTEM
PIANO 1 PIANO 2 PIANO 3 PIANO 4 E.PIANO 1 E.PIANO 2 E.PIANO 3 VIBES ORGAN 1 ORGAN 2 STRINGS BASS
VOICE
PERF. B
PERF. A
EDIT
STORE
ORGAN
COMBINATION
123456 897 10 11 12
!
# $%& ' (
"
■ UPPER PANEL—C