Filter
Top Products
52
PERFORMANCE ENABLE
The Performance Enable function lets you switch between
System (“Sys”) settings and Performance (“Perf”) settings for
MIDI channel assignments, local on/off status and controller
assignments. This function lets you apply the System settings
designated in Voice Play mode to all of the Performances.
● PERFORMANCE MIDI CHANNEL (Perf, Sys)
When Perf is selected, the MIDI transmit and receive channels
designated for the currently selected Performance will be effective.
When Sys (default) is selected, the MIDI transmit and receive
channels designated for the Voice Play mode will affect the entire
system.
● PERFORMANCE LOCAL (Perf, Sys)
When Perf is selected, the Local On/Off setting designated for the
currently selected Performance will be effective. When Sys
(default) is selected, the Local On/Off setting designated for the
Voice Play mode will affect the entire system.
● PERFORMANCE CONTROL (Perf, Sys)
When Perf is selected, the controller assignments designated for
the currently selected Performance will be effective. When Sys
(default) is selected, the controller assignments designated for the
Voice Play mode will affect the entire system.
POPUP TIME
The Popup Time function lets you set the number of seconds
a temporary message displays in the screen.
The P-200 has a number of messages which appear in the
screen depending on which feature you access. By setting the
Popup Time, you can determine how long the message stays
in the screen.
You can also set the Program Change message screen to
temporarily display when you change voices or Performances.
● PC (OFF, 1 ~ 5)
You can either turn the Program Change popup screen off or have
it display between one and five seconds. (The default setting is
Off.)
● OTHERS (1 ~ 5)
You can have all other popup screens display between one and
five seconds. (The default setting is 3.)
STORE TYPE
The Store Type function lets you designate Auto Store or Non
Auto Store status. (For information about storing, see page
60.)
●
NON AUTO STORE
In Non Auto Store (default) status, only System, MIDI Filter and PC
Table parameters you change will automatically be stored. Any
other changes in Edit mode will cause the STORE? (YES/NO)
screen to display to prompt you for confirmation before exiting the
Edit mode. Any other changes made in Voice Play mode and
Performance Play mode will be ignored unless you specifically
perform the store operation.
● AUTO STORE
In Auto Store status, all settings you change will automatically be
stored.
When Non Auto Store is selected and Edit mode is engaged, the letter S, P
or V will appear to the right of the page number in the upper right hand
corner to indicate which type of parameters you are editing—System,
Performance or Voice parameters, respectively.
Channel, Local, CS FC and PS settings are basically classified as
Performance parameters, though they are treated as System parameters
when Sys is selected for MIDI Channel, Local or Controller Assign in the
Performance Enable function (System Menu); see left. When Sys has been
selected, the letter S will appear to the right of the page number, replacing
the letter P.
PANEL SWITCH LOCK MODE
This control determines whether the Panel Switch Lock
function (page 41) can be used or not. When set to Enable,
the Panel Switch Lock is available; the Disable setting disables
the function. The setting made here is automatically stored.
●
DISABLE
When set to Disable (default), the Panel Switch Lock function
cannot be used; in other words, double clicking a [VOICE
SELECT] button will not lock the panel controls.
PERF.MIDI CH )
sys/ sys/ sys
PERF.CTRL. )
sys/ sys/ sys
POPUP TIME *
PC=off OTHERS= 3
PERF.LOCAL )
sys/ sys/ sys
POPUP TIME *
PC=off OTHERS= 3
STORE TYPE +
auto store
LOCK MODE
Disable
NOTE
NOTE