Filter
Top Products
27
CHANGING REVERB DEPTH
1.
Hold the [REVERB] button and move the [DATA ENTRY] slider (or press
[–1/NO] or [+1/YES]).
As soon as you move the [DATA ENTRY] slider (or press [–1/NO] or [+1/YES])
the REVERB DEPTH screen appears.
If you move the [DATA ENTRY] slider upward, the depth level increases; if you
move the [DATA ENTRY] slider downward, the depth level decreases.
A value of 7 will produce the largest number of reverberations, whereas a value
of 0 will effectively turn the reverb off.
2.
Release the [REVERB] button.
After a moment, the voice name will reappear in the screen.
Try different settings and play the keyboard and notice the difference between
high and low reverb depth level settings, and the P-200’s wide variety of reverb
options.
CS
DATA ENTRY
REVERB
MODULATION
ROOM
STAGE
HALL
CHORUS
SYMPHONIC
TREMOLO
EFFECT
+1/YES-1/NO
PS2PS1
+
or
■ Modulation Effects
The P-200’s internal DSP digital signal processor generates three types of
modulation effects which you can apply to the voices. (Note: These modulation
effects are unrelated to the vibrato effect which you can apply to voices using the
[MODULATION] wheel. For details about the vibrato effect, see page 59.)
These include CHORUS, a modulated delay which effectively makes a voice sound
like more than one instrument is being played, SYMPHONIC, a more pronounced
chorus effect, and TREMOLO, a rotating speaker effect.
As you select each voice you will notice that most have a specific modulation effect
already assigned to them, indicated by a lit LED to the left of the name of the
selected modulation effect type. These are the initial default assignments set at the
factory, but you can select any modulation effect you wish for each voice, or even
turn the modulation effect off. You can also change modulation speed on the spot.
SELECTING A MODULATION TYPE
Press the [MODULATION] button once or more.
When you press the [MODULATION] button repeatedly, the modulation types will be
selected in order as follows: CHORUS, SYMPHONIC, TREMOLO, then OFF. (No lit
LED represents Off status.)
REVERB
MODULATION
ROOM
STAGE
HALL
CHORUS
SYMPHONIC
TREMOLO
EFFECT
In Voice Play mode, a different reverb
type and depth can be selected for
each voice. When you play two voices
in either Dual or Split mode, the P-200
will apply the main voice reverb type
and depth setting to both voices, and
ignore any settings which you may
have made for the sub voice. For more
information about main and sub
voices, see page 29.
NOTE
NOTE
You can also select the modulation
type and speed settings in Edit mode
(see page 59).