Filter
Top Products
17
Descriptions of all parameters and
details about how to access and
manipulate them are provided in the
appropriate sections herein. Also see
the Blank Chart on page 78.
■ System Settings
The P-200’s overall System settings encompass those “global” parameters which are
related to the instrument as a whole, and which therefore affect both Voice Play and
Performance Play modes.
These include master tuning, MIDI transmit enable, MIDI filter transmit and receive
parameter settings, MIDI program change table settings, and others.
SYSTEM
MIDI TRANSMIT ENABLE On, Off
• Master Tune
• Reverb Bypass
• Device Number
SYSTEM • MIDI Merge
• Performance Enable
• Popup Time
• Store Type
• Panel Switch Lock Mode
MIDI FILTER
• Transmit
• Receive
PROGRAM CHANGE TABLE
• Transmit Number, Bank
Select Number
• Receive Number
■ Editing and Storing Features
When the P-200 is in Edit mode, you can access and modify the System and other
parameters.
A convenient Auto Store feature (which you can disengage) automatically stores the
System settings and other parameters as you change them. Within either Voice Play
mode or Performance Play mode, you can store the current set of all settings as a
User Performance.
There is a fine distinction between Voice Play mode store and Performance Play
mode store functions. In Voice Play mode, you can overwrite the current set of Voice
and Performance parameter settings. In Performance Play mode, you can select a
specific destination Performance in which to store the current Performance
parameter settings. Therefore, if you select a destination Performance in which to
store the current Voice Play mode Performance parameter settings, you are storing it
in the Performance Play mode.
You will find it most convenient to set up your Performances in Voice Play mode,
Auto Store status, since voice selection is so simple, then copy it to one of the 24
Performance memories for instant recall when you need it.
By switching into Non Auto Store status, you can be sure that your Performances are
protected, and any changes you make in one will not be applied unless you
specifically store, or overwrite, it. In Edit mode, the P-200 will prompt you
automatically whether or not to overwrite the current changes.
You can also dump Performance data to and from external MIDI devices.
NOTE