Filter
Top Products
18
OPERATION GUIDE
Advanced Functions
The advanced functions are special functions not generally used
in normal operation, but for specific applications. These are also
“hidden” functions, accessed by double-clicking a button or
pressing two buttons together.
Program Change Table
The Program Change Table setting is for use with XG applica-
tions, specifically when using the P50-m to replace the piano
sounds of a connected second tone generator.
Settings: off (oFF), on
Normally (and when power is turned on), this is set to “oFF.”
When set to “oFF,” the P50-m responds only to program
changes 0 — 28. All other numbers are ignored, and the last
selected Voice stays active.
When set to “on,” the P50-m functions as a XG module for
piano parts only. In this case, program changes (0 — 5, 7)
corresponding to piano parts (according to XG) will select similar
Voices on the P50-m, and all other numbers select a “blank” si-
lent Voice (Voice No. 29). This ensures that the P50-m will play
only the piano parts in XG song data.
1.
Double-click the SELECT button (press it twice quickly).
2.
Use the DATA dial to change the Program Change Table setting.
Double-click.
Lamp flashes.
Program Change Table setting.