Filter
Top Products
22
OPERATION GUIDE
Factory Set
This function restores the original factory settings of the P50-m.
When you make changes to the various controls of the P50-m,
the new settings automatically replace the original factory settings
and are retained in memory even when power is turned off. Use
Factory Set to cancel your own settings and restore the factory
settings.
Keep in mind that this function completely alters any changes you
have made to the settings. If you want to keep your custom
settings, make a note of them before using Factory Set.
Simultaneously hold down the SELECT button and turn the
power on. (The message “FAc” appears in the display.)
Factory Set resets the following parameters and values:
Voice Number 01
Brightness 00 (all voices)
Reverb Send (varies according to the Voice)
Master Tune 440 (Hz)
Note Shift 00
Touch 0
MIDI Channel 01
Program Change Table off
Device Number ALL
Receive Mode ALL
MIDI OUT Mode ot1
Hold down
Push (power on)