Filter
Top Products
19
OPERATION GUIDE
● When Program Change Table is set to “oFF”
The P50-m does not respond to XG System On or GM Mode On
messages.
● When Program Change Table is set to “on”
The P50-m responds to XG System On or GM Mode On messages and
performs the following:
•Resets all controllers to default or “zero” values.
•Selects Voice number 9 (the Voice most similar to GM voice 001,
Grand Piano).
•Parameters of all voices are set to the same values as the Voice
number 9 (Grand Piano).
•Sets Reverb Send of selected Voice to 040.
•Sets Transpose to 00.
Changing the Device Number
Device Number is a kind of MIDI “identification” number. This is
convenient when using two or more P50-m units together in a
MIDI chain. It is also important when sending System Exclusive
data. When each unit in a chain is assigned a different Device
Number, the controlling MIDI device can distinguish between
different units.
The “ALL” setting allows the P50-m to respond to all 16
Device Numbers. For normal operation, this should be set to
“ALL.”
Settings: 01 — 16, ALL
1.
Double-click the TOUCH button (press it twice quickly).
2.
Use the DATA dial to change the Device Number setting.
Double-click.
Lamp flashes.
Device Number setting.