Filter
Top Products
S90 XS/S70 XS Editor Window: Detailed Parameter section (when the Voice/Multi is set to “Multi”)
S90 XS/S70 XS Editor Owner’s Manual
29
Detailed Parameter section (when the Voice/Multi is set to “Multi”)
This section indicates the detailed parameters of the selected category for the current Part and the Voice
assigned to the current Part, or the Global settings. This section introduces what parameters belong to each
of the Parameter Categories. For details about each parameter, refer to the Owner’s Manual of the S90 XS/
S70 XS.
Four Indicators showing the Editing Status
One or more of the following four indicators are shown at the right top of the window when you edit a
parameter.
n These indicators, “V,” “M,” “G” and “F” are linked with the small squares at the top right of the “1” – “16” boxes and “G”
box in the Mixer section. The “V,” “M” and “G” indicators disappear if you execute the Voice Store, Mixing Store and
Global Store operations, respectively. The “F” indicator and the small squares at the top right of the “G” box in the Mixer
section disappear only if you execute the File Save operation. All the indicators and the small squares disappear if you
execute the File Save operation.
Global Settings
This Parameter category, called up by selecting the “G” row in the Mixer section, consists of the following
sub categories.
Controller Assign
Clicking this in the Parameter Category section calls up the Controller Assign parameters in the Detailed
Parameter section. On the S90 XS/S70 XS instrument, these parameters are the same as those called up
by selecting “Controller” on the Utility Select display.
Indicates that the Voice edits are not stored yet as a User Voice or Mixing Voice. This indicator
disappears when you execute Voice Store (page 47).
Indicates that the Multi edits are not stored yet. This indicator disappears when you execute Mixing
Store (page 48).
Indicates that the Global edits are not stored yet. This indicator disappears when you execute Global
Store (page 47).
Indicates that the parameter edits are not saved yet as a file.
V, M, G, F
indicators