Filter
Top Products
S90 XS/S70 XS Editor Window: Bottom section
S90 XS/S70 XS Editor Owner’s Manual
33
3 Knobs
This section lets you adjust various parameters assigned to the Knobs on the front panel of the S90 XS/
S70 XS instrument.
1 [TONE]/[EG]/[EQ]/[Effect]/[MIC]
Same as the Knob Function buttons on the panel of the S90 XS/S70 XS.
2 Knobs 1 – 4
Same as the four knobs on the panel of the S90 XS/S70 XS.
4 ARP (Arpeggio)
Allows you to change the Arpeggio related setup (on/off status and selecting 1 – 5).
5 MIDI monitor
Turns the MIDI monitor function on or off. When this MIDI jack icon is turned on, the MIDI
messages transmitted from the S90 XS/S70 XS through the MIDI port set via the Data Port
parameter on the Editor Setup window (page 39) will be shown on the virtual keyboard at the
bottom of the Editor window.
6 [A.Func] (Assignable Function) button
This button is related to “All AF off,” “AF1 on” and “AF2 on” selected as a value of the XA Control
parameter on the OSCILLATOR/PITCH window of the Normal Voice Element Edit. For details, refer to the
Owner’s Manual of the S90 XS/S70 XS.
7 Keyboard
Allows you to audition the edited sound. Note on/off messages corresponding to the keys you click or
drag will be transmitted to the external device via the MIDI port specified in the Editor Setup window
(page 39) as the MIDI OUT parameter.
n The velocity when clicking a key is determined by the setting of the Keyboard Velocity parameter (page 41)
in the Setup window.
n When a Drum Voice is edited, you can initialize the parameter settings of each key by right-clicking on the
virtual keyboard. From the menu called up by right-clicking, selecting “Initialize key” will initialize all the
parameter settings except for the waveform assignment of the currently selected drum key, while selecting
“Initialize key (with Wave)” will initialize the all the parameter settings including the waveform assignment.
21