Filter
Top Products
Menu: [File] menu
S90 XS/S70 XS Editor Owner’s Manual
40
5 Auto Sync Setting
This section lets you set how the data synchronization between the S90 XS/S70 XS Editor and the S90
XS/S70 XS instrument is executed when “OFFLINE” is changed to “ONLINE.” Actual data
synchronization is executed from the Auto Sync window (page 51) called up automatically under certain
circumstances such as clicking the [OFFLINE] button, starting the S90 XS/S70 XS Editor and opening a
new file on the Editor.
Global
Determines whether or not the Global data (see page 4) is synchronized and which data (S90 XS/S70 XS
Editor or S90 XS/S70 XS itself) is synchronized with the other.
Current
Determines whether or not the Current data (see page 4) is synchronized and which data (S90 XS/S70
XS Editor or S90 XS/S70 XS itself) is synchronized with the other.
Voice
Determines whether or not the Voice data (see page 4) is synchronized and which data (S90 XS/S70 XS
Editor or S90 XS/S70 XS itself) is synchronized with the other.
Auto Start
When this is set to “On” and one of the following operations is executed, data synchronization will be
started automatically as soon as the Auto Sync window is opened.
• When clicking “OFFLINE” after setting the MIDI IN/OUT parameter correctly in the Utility mode on
the S90 XS/S70 XS, setting the MIDI Ports correctly on the computer, and making a proper
connection.
• When the connection between the S90 XS/S70 XS and a computer are corrected after
appropriately correcting the setup of the S90 XS/S70 XS and the computer.
• When the settings on the S90 XS/S70 XS instrument and the computer are corrected after
appropriately reconnecting the devices.
n The parameters set here apply also to the parameters having the same names in the Auto Sync window.
CAUTION
When the Auto Start parameter is set to “On,” data synchronization is started automatically under certain circumstances
(page 51) such as clicking the [OFFLINE] button, starting the Editor and opening a new file on the Editor. Keep in mind that
this will cause unexpected data loss on the S90 XS/S70 XS Editor or the S90 XS/S70 XS itself, since new data automatically
overwrites old data upon data synchronization. Make sure to save your important data before using the S90 XS/S70 XS
Editor.