Filter
Top Products
Troubleshooting
S90 XS/S70 XS Editor Owner’s Manual
52
Troubleshooting
If you encounter problems such as no sound output or abnormal behavior, verify the connections before
checking the following.
Sound does not change when using the knobs or sliders.
• Is “ONLINE” indicated on the Editor window?
• Is the lamp at left of “ONLINE” indicator turned on?
If it is turned off, the settings related to communication between the S90 XS/S70 XS and a
computer may be wrong. Check the MIDI Port setting on the S90 XS/S70 XS Editor and Studio
Manager, the MIDI IN/OUT parameter setting in the MIDI display of the Utility mode on the S90
XS/S70 XS instrument, or the cable connection between the S90 XS/S70 XS and the computer.
• Check the MIDI Port setting and Device No. setting. (page 39)
Bulk data is not transmitted/received successfully.
• Check the same points as above such as “ONLINE” indication and MIDI Port settings.
The appropriate Port is not shown in the Setup window.
• The MIDI Port in the Setup window can be selected from the Ports specified in the host
application. Check the MIDI Port settings in the host application.
• When “!” is shown at left of the Port name (e.g., “! Yamaha USB IN 0-1”), this indicates that the
previously used Port cannot be found or some Ports are not set properly. Check the MIDI Port
settings in the host application.
U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
©2009 Yamaha Corporation
905MW-A0