Filter
Top Products
Basic Operations
S90 XS/S70 XS Editor Owner’s Manual
34
Basic Operations
This section covers basic operations of the S90 XS/S70 XS Editor.
Naming a Voice
You can assign an original name of your choice to the edited Voice on the VOICE LIBRARY window,
GENERAL window in the Part Common General, and the Store window.
From the VOICE LIBRARY window (page 14), select a User Voice or Mixing Voice then click the selected
Voice so that you can edit the name. After editing the Voice name, pressing the <Enter> key or locating the
cursor to another parameter finalizes the edited name while pressing the <Esc> key aborts it.
From the GENERAL window (below) and Store window (page 47), locate the cursor in the text box of “Voice
Name” at the top of this window, then edit the name in the text box as desired. After editing, pressing the
<Enter> key or locating the cursor to another parameter finalizes the edited name.
Searching for a Voice/Arpeggio Type
You can search for the desired Voice, Multi and Arpeggio Type on the VOICE LIBRARY window (page 14),
MULTI LIBRARY window (page 18) and ARP LIBRARY window just by inputting a keyword in the text box at
the bottom of these windows respectively. Likewise, the Search function is available on the Import window
(page 37).
Inputting a numerical value
When double clicking a value box such as that shown above, the value box can be edited and you can input
a numerical value directly by using numeric keys. After editing, pressing the <Enter> key or locating the
cursor to another parameter finalizes the value while pressing the <Esc> key aborts it. You can edit the value
also by using the Cursor key or <Page Up>/<Page Down> key after clicking this box.
In Windows, to reset the value to its default, simultaneously hold down the <Ctrl> key and click on the value
box. On the Macintosh, to reset the value to its default, simultaneously hold down the Command key and
click on the value box.
n For certain parameters, the value can be edited only by using the mouse and cannot be input directly by using the
numeric keys.