Filter
Top Products
23
Power-on Procedure
Always follow proper procedure when powering-up a sound system to
minimize the possibility of damage to the equipment (and your ears!).
1. Make sure your sound system’s main level/volume control(s) and the
VL70-m volume control are turned all the way down prior to turning
power on.
2. Turn on the VL70-m.
3. Turn on your MIDI controller (and computer/sequencer, if used).
4. Turn on the sound system.
5. Raise the sound system volume to a reasonable level.
6. Gradually raise the VL70-m VOLUME control while playing the MIDI
controller to set the desired listening level.
■
NOTES
• Some keyboards and other MIDI controllers automatically transmit MIDI control change
data corresponding to their control status when the power switch is turned ON or OFF.
The VL70-m is programmed to receive this data and respond accordingly, so it is prefer-
able to turn the VL70-m ON before turning the controlling device ON.
Setting Up