Filter
Top Products
79
● “Others” Edit Parameter Descriptions
The small parameter numbers in parentheses apply in the VL-XG sound module mode.
Detune & Voice Level
04
(04): Detune
• Detune
• Settings: -12.8 … +12.7 Hz
The “Detune” parameter allows the pitch of the
VL70-m to be shifted slighlty upward or down-
ward to produce detune effects in relation to other
VL70-m units or other tone generators being used
with the VL70-m. Positive values shift the pitch
upward by the indicated amount in Hertz, and
negative values shift the pitch downward.
05: Voice Level (VOICE mode only)
• Voice Level
• Settings: 000 … 127
Sets the level (volume) of the voice. The higher the
value the higher the volume. The minimum setting
of “000” will result in no sound.
Other Edit Parameters
Vibrato
01
(01): Vib Rate
• Vibrato Rate
• Settings: -64 … +63
The vibrato effect produces a cyclic variation in
pitch and embouchure. The “Vib Rate” parameter
sets the speed of the vibrato effect. Positive values
produce a faster vibrato, while negative values
produce a slower vibrato.
• In the VL70-m extremely realistic vibrato
effects are produced by simultaneously modu-
lating the pitch, embouchure, and pressure
parameters.
02(02): Vib Depth
• Vibrato Depth
• Settings: -64 … +63
Sets the depth of the vibrato effect. The higher the
value the greater the vibrato depth. Positive values
produce greater vibrato depth while negative values
result in reduced vibrato depth.
03(03): Vib Delay
• Vibrato Delay
• Settings: -64 … +63
Sets the delay time between the beginning of a
note and the beginning of the vibrato effect.
Positive values produce longer delays while
negative values result in shorter delays.