A SERVICE OF

logo

416 CHAPTER 12: USING SYSTEM MANAGEMENT COMMANDS
Use the undo ntp-service unicast-server command to remove the
configuration.
By default, no Ethernet switch operates in the NTP client mode.
The remote server specified by remote-ip serves as the NTP server and the local
Ethernet switch serves as the NTP client. The client can be synchronized to the
server while the server cannot be synchronized to the client.
Example
# Configure the local device to be synchronized to the NTP server
with the IP address 128.108.22.44, and set the version number to 3.
<SW4500> system-view
System View: return to User View with Ctrl+Z.
[SW4500] ntp-service unicast-server 128.108.22.44 version 3