A SERVICE OF

logo

122 CHAPTER 4: CONFIGURING PATHBUILDER S330/S310 MODULES, PORTS, AND APPLICATIONS
Figure 93 CBR E1 Configuration Menu
3 Select the option corresponding to the port you want to configure ([1] Port 1, [2]
Port 2, or [3] Port 3). The CBR T1-DSX/E1Port Configuration menu for the selected
port appears. Figure 94 shows a CBR Port Configuration menu for an CBR E1 card.
For the PathBuilder S310, you can configure only one T1-DSX/E1 port on the CBR
module.
Figure 94 CBR E1 Port Configuration Menu (Unstructured Mode)