ICP-CC404 | Installation Guide | 22.0 Programming Sheets
92 Bosch Security Systems, Inc. | 12/08 | F01U089401-02
Location
Function
Options/Notes
Default/
Programming Entry
0
425
System Options 2
Refer to page 73
1 Codepad panic to be silent
2 Codepad fire to be silent
4 Codepad medical to be silent
8 Access denied (code retries) to be silent
8
426
System Options 3
Refer to page 74
1 AC fail after 1 hr (disabled = after 2 min)
2 Ignore AC fail
4 Pulse count handover allowed
8 Handover delay to be sequential
0
427
System Options 4
Refer to page 74
1 Control panel to power up disarmed (if power reset)
2 Arm/disarm tracking on power up
4 Internal crystal to keep time
8 Night arm station, or RE005E installed
0
428
Consumer Options 1
Refer to page 75
1 Test reports only when armed
2 Test report after siren reset
4 Auto arm in STAY Mode 1
8 STAY indicator to display day alarm status
2
429
Consumer Options 2
Refer to page 75
1 Codepad display extinguish after 60 sec
2 Single button arming allowed (AWAY/STAY Modes 1 and 2)
4 Single button disarming allowed (STAY Modes 1 and 2)
8 Alarm memory reset on disarm
5
430
Consumer Options 3
Refer to page 75
1 Codepad fault beeps allowed
2 Use digit 3 for codepad duress alarm (instead of digit 9)
4 Alarms activate sirens and strobe outputs in STAY Modes 1 and 2
8 Reserved
0
431
Radio Input Options
Refer to page 76
1 Radio receiver (WE800E)
2 Latching keyswitch input
3 Momentary keyswitch input
4 Reserved
466 to 513
Domestic Telephone Numbers
Refer to page 41
748 to 749
Reserved
0 2
750 to 781
Country Codes
Refer to page 93
Location 750: Country Code (tens digit)
Location 751: Country Code (units digit)
0
900
Default Options
Refer to page 15
0 Defaulting system allowed
15 Defaulting system disabled
0 0 0 0
901 to 904
System Time
Refer to page 72
Location 901: Hour of day (tens digit)
Location 902: Hour of day (units digit)
Location 903: Minute of day (tens digit)
Location 904: Minute of day (units digit)
0 1 0 1 0 1
905 to 910
System Date
Refer to page 72
Location 905: Day of the month (tens digit)
Location 906: Day of the month (units digit)
Location 907: Month of the year (tens digit)
Location 908: Month of the year (units digit)
Location 909: Current year (tens digit)
Location 910: Current year (units digit)
