SCSI Device Problems
Table 13–19 Installed Software Problems
Possible Cause Corrective Action
Default boot device is set
incorrectly.
See Chapter 10 to set or change the
default boot device.
Default startup action may
be set to halt.
See Chapter 10 to change the default
startup action.
System startup command
procedure was modified
incorrectly.
Refer to your operating system
documentation for help.
A problem exists with the
fixed disk.
Refer to Chapter 14 for information on
running diagnostic tests.
A problem exists with the
operating system software (if
installed) on the fixed disk.
Refer to your operating system software
documentation for help.
Incorrect SYSGEN
parameters for OpenVMS
AXP operating system.
Perform conversational or minimum
boot. Refer to your OpenVMS AXP
operating system documentation listed
in Table 6–5.
Incorrect settings
for
scsi_reset
and
boot_reset
environment
variables.
Set
scsi_reset
to 4 and
boot_reset
to on.
The
boot_osflags
variable
is incorrectly set.
Consult your operating system
documentation.
Identifying a Problem 13–25
