Connecting the Workstation
Table 3–2 Making Monitor Connections
Step See diagram with... Then...
Three connectors
(color monitor)
Connect all three cable connectors
to the monitor, matching the color
cables, red (R), green (G), and
blue (B), with the corresponding
connectors marked R, G, and B on
the monitor.
Five connectors
(color monitor)
Do not use the H/C and V
connectors. Connect the other
three cable connectors as
described above.
Six connectors
(Video In and
Video Out)
Use the three Video In connectors.
Connect the three cable connectors
as described above.
One connector
(monochrome
or greyscale
monitor)
Connect only the middle, green
(G) cable connector to the monitor.
Monitor power
cord
Connect the monitor power cord
to the power socket on the rear of
your monitor. The power socket
may be in a different location from
the position shown here.
3–6 Installing a Workstation System
