A SERVICE OF

logo

4 - 15
ENG
ENGINE DISASSEMBLY
3.Remove:
Lock washer 1
Balancer gear 2 (driven)
Straight key 3
CRANKCASE (LEFT)
1.Remove:
Screws (crankcase)
NOTE:
Working in a crisscross pattern, loosen all
screws 1/4 turn each. Remove them after all
are loosened.
2.Remove:
Crankcase 1 (left)
Dowel pins
*********************************
Removal steps:
Attach the Crankcase Separating Tool 2
and Attachment 3 to the left side crank-
case.
Crankcase Separating Tool:
P/N. YU-01135-A, 90890-01135
Attachment:
P/N. YM-33282, 90890-04089
(for USA)
P/N. YM-33278, 90890-04087
(except for USA)
4