A SERVICE OF

logo

2 - 27
SPEC
CABLE ROUTING
Î
Route the carburetor overflow hose between
the engine and upper rear engine mount and
then between the engine and swingarm.
Make sure that the hose is not pinched.
Bend the cable guide after routing the
cables.
Ï
Fasten the starter motor lead and wire har-
ness to the frame with the plastic clamp.
Ì
Route the rear brake cable and rear brake
breather hose through the cable guide.
Ó
10 mm (0.4 in)
È
100 mm (4.0 in)
Ô
40 ~ 50 mm (1.6 ~ 2.0 in)
2