3 - 14
INSP
ADJ
THROTTLE CABLE FREE PLAY
ADJUSTMENT
NOTE:
Before adjusting the throttle cable free play,
the engine idle speed should be adjusted.
1.Place the machine on a level place.
2.Check:
● Throttle cable free play a
Out of specification → Adjust.
Throttle cable free play:
3 ~ 5mm (0.12 ~ 0.20 in)
a
3.Adjust:
● Throttle cable free play
NOTE:
If the throttle cable free play can not be
adjusted on the carburetor side, adjust it on
the throttle housing side.
**********************************
Adjustment steps:
●Pull back the adjuster covers 1 from the
both side (throttle housing and carburetor).
●Make sure that the adjuster 2 and locknut
3 on the throttle housing side are fully
tightened.
●Loosen the locknut 4 on the carburetor
side.
●Turn the adjuster 5 clockwise or counter-
clockwise until the proper free play is
obtained.
●Tighten the locknut.
●Reset the adjuster covers.
Clockwise Free play is increased.
Counterclockwise Free play is decreased.
THROTTLE CABLE FREE PLAY ADJUSTMENT
3
