Filter
Top Products
56 ARTURIA – Analog Factory EXPERIENCE 2.5 – USER’S MANUAL
• You are entitled to prepare a backup copy of the software which will not be used for
purposes other than storage purposes.
• You shall have no further right or interest to use the software other than the limited
rights as specified in this Agreement. Arturia reserves all rights not expressly granted.
3. Activation of the Software
• Arturia may use a compulsory activation of the software and a compulsory
registration of the OEM software for license control to protect the software against unlawful
copying. If you do not accept the terms and conditions of this Agreement, the software will
not work.
• In such a case the product including the software may only be returned within 30
days following acquisition of the product. Upon return a claim according to § 11 shall not
apply.
4. Support, Upgrades and Updates after Product Registration
• You can only receive support, upgrades and updates following the personal product
registration. Support is provided only for the current version and for the previous version
during one year after publication of the new version. Arturia can modify and partly or
completely adjust the nature of the support (hotline, forum on the website etc.), upgrades
and updates at any time.
• The product registration is possible during the activation process or at any time later
through the Internet. In such a process you are asked to agree to the storage and use of
your personal data (name, address, contact, email-address, and license data) for the
purposes specified above. Arturia may also forward these data to engaged third parties, in
particular distributors, for support purposes and for the verification of the upgrade or
update right.
5. License module (eLicenser Key and/or Soft eLicenser)
• Arturia uses a hardware device connected through the USB connection of a
computer, the “eLicenser dongle” and/or a protection scheme, the “Soft eLicenser” for
license control (hardware and/or virtual dongle). The eLicenser dongle and/or Soft eLicenser
permanently saves the license information and regulates access to the software. If a
eLicenser dongle is required for the use of the software, then the eLicenser dongle must be
connected physically to the computer through the USB interface.
• For the activation of the software, updates or upgrades of the software the computer
which is connected to the Arturia key and/or using the Soft eLicenser or using the OEM
software must be connected to the server of SIA eLicenser through the Internet. If the
product was delivered with the eLicenser dongle, the license information was already
transferred to the eLicenser dongle. If the product was delivered with a product card
(without the eLicenser dongle), the activation codes of the enclosed product card must be
entered manually by the user upon installation and the license information must be
exchanged with the server of SIA eLicenser.
• In the event of OEM software, the activation codes will be sent to an email-address
submitted by you during a registration and must be entered manually by the user upon
installation and the license information must be exchanged with the server of SIA eLicenser.