Filter
Top Products
Axiom Line User Guide
44
English
Appendix F – Assignable Controller Numbers to Rotary Encoders
This table only applies to the Rotary encoders on your Axiom
MIDI CC Description Data 1 Data 2 Data 3
0-119 Standard MIDI CC's - MIN MAX
120-127 Channel Mode Messages - MIN MAX
128 Pitch Bend Sensitivity - - -
129 Channel Fine Tune - - -
130 Channel Coarse Tune - - -
131 Channel Pressure - - -
132 RPN coarse - RPN LSB RPN MSB
133 RPN fine - RPN LSB RPN MSB
134 NRPN coarse - NRPN LSB NRPN MSB
135 NRPN fine - NRPN LSB NRPN MSB
136 Master Volume GM* - - -
137 Master Pan GM* - - -
138 Master Coarse Tune GM* - - -
139 Master Fine Tune GM* - - -
140 Chorus Mod rate GM2* - - -
141 Chorus Mod Depth GM2* - - -
142 Feedback GM2* - - -
143 Send to Reverb GM2* - - -
144 Pitch Bend - Pitch Bend MIN Pitch Bend MAX
145 Program Change increment/decrement - MIN MAX
146 2’s comp from 64 / Relative (binary offset) - MIDI CC -
147 2’s comp from 0 / Relative (2’s comp) - MIDI CC -
148 Sign Magnitude / Relative (signed bit) - MIDI CC -
149 Sign Magnitude / Relative (signed bit 2) - MIDI CC -
150 Single Value increment/decrement - MIDI CC -
151 RPN increment/decrement message - MIDI CC -
152 NRPN increment/decrement message MIDI CC
*** Controller Off*** - - -
* SysEx messages - for details please see section 3.6.7.2.
** MMC SysEx messages, for details please see section 3.8.2.
*** This value cannot be typed in using the numeric keypad. Type in 0 and then press the ‘-‘ button to set this value.