Filter
Top Products
17
E
situations.
Before applying the FEEDBACK DESTROYER PRO, it is therefore advisable to remove the condition causing
the feedback problems. For example, try different microphone positions! Use the FEEDBACKDESTROYERPRO
in the monitor path and in single channels with critical signals. If there is no other way to eliminate feedback,
you can insert the FEEDBACK DESTROYER PRO into the main mix bus. Unless your mixing console has
dedicated insert points for the main mix bus, you can simply connect the FEEDBACK DESTROYER PRO
between mixing console and power amp. If required, adapt the levels with the Operating Level switch.
Wire the unit as shown below:
Master Out
P.A. System
Fig. 3.2: Using the FEEDBACK DESTROYER PRO in the main mix bus
3. APPLICATIONS