Filter
Top Products
72
Organizing your songs
Naming a song (Song Name)
When you create a new song, the BR-1600CD will automatically
name it “SONG 001” or something similar. If all songs are named in
this way, however, it will be difficult to tell them apart. It is
recommended that you name your songs appropriately so that they
can be conveniently managed later on.
fig.16-05
1.
Press [UTILITY].
The Utility Menu screen will appear.
fig.12-12d
2.
Move the cursor to the SONG icon and press [ENTER/YES].
Alternatively, you can press [F2] (SONG) if the SONG
icon is currently displayed.
The Song Menu screen will appear.
fig.16-03d
3.
Move the cursor to the NAME icon and press [ENTER/
YES].
Alternatively, you can press [F1] (NAME) if the NAME
icon is currently displayed.
The Song Name screen will appear.
fig.16-25d
4.
Move the cursor to the character you want to change
and select a new character using the TIME/VALUE dial.
5.
Press [EXIT/NO] several times to return to the top
screen.
Saving your song (Song Save)
Note, however, that the BR-1600CD stores the following
when songs are saved.
●
Audio data
●
Mixer settings
●
The Insert Effects’ song patch (i.e., S001 through S050*)
* S001 through S100 in the case of the Guitar Bank
* S001 through S010 in the case of the Multi Channel Bank
●
The Vocal Tool Box’s song patch (i.e., S01 through S10)
●
The Mastering Tool Kit’s song patch (i.e., S01 through S19)
●
The Speaker Modeling’s song patch (i.e., S01 through S33)
●
Rhythm Arrangement settings (i.e., S001 through S010)
●
Loop Phrase sequence (i.e., S001 through S050)
●
Bass pattern (i.e., S000 through S999)
●
Drum pattern (i.e., S000 through S999)
●
Loop Effect settings (i.e., S001 through S050)
●
3 Band EQ and Compressor settings
●
Tuner settings
●
Utility settings (with the exception of LCD contrast,
phantom, sub mixer and Digital In Assign)
1.
With the top screen displayed, hold down [STOP] and
press [REC].
The message “Save Current?” will appear.
fig.16-30d
2.
Press [ENTER/YES]. (If you do not want to save, press
[EXIT/NO].)
The message “Storing Current...” will appear on the
screen and saving of the song will begin. When saving
has been completed, the message “Complete!” will
appear.
2,3
5
4
1
In addition to the above method, songs can also be
saved from the Utility screen. Please refer to “Saving
your song from the Utility screen” (Basic Operation;
p. 57).
BR-1600_R_e.book 72 ページ ２００７年１２月６日 木曜日 午前９時５２分