Filter
Top Products
E-14
C
3
B
2
+
/
–
keys
Number Input keys
• A note does not sound when you press a keyboard
key at this time.
4.
Release the CONTROL button to complete the
procedure.
❚
NOTE
• The setting you make for the main tone volume remains in effect
even if you change to another tone.
To adjust the volume of the layer tone
1.
Hold down the CONTROL button, and keep it
depressed until you reach step 4 of this
procedure.
2.
Press the GRAND PIANO 2 button.
• This causes the indicator lamp above the button to
flash.
3.
Use one of the procedures below to set the layer
tone volume to a value in the range of 40 to 127.
• To scroll the volume setting value: While holding
down the CONTROL button, use the + (increase) and
– (decrease) keys to scroll the volume setting value.
Holding down either key changes the setting at high
speed.
Pressing + and – at the same time automatically selects
a volume setting value of 72.
• To input the volume setting value: While holding
down the CONTROL button, use the number input
keys to input a two-digit or three-digit volume setting
value in the range of 40 to 127. You can input a two
digit or a three-digit value. The level you input is
applied to the volume setting value when you release
the CONTROL button. The volume setting does not
change if you input a one-digit value or a value that
is outside of the allowable range.
C
3
B
2
+
/
–
keys
Number Input keys
• A note does not sound when you press a keyboard
key at this time.
4.
Release the CONTROL button to complete the
procedure.
❚
NOTE
• The setting you make for the layer tone volume remains in effect
even if you change to another tone.
Using Split
With split you can assign two different tones (a main tone
and a split tone) to either end of the keyboard, which lets
you play one tone with your left hand and another tone with
your right hand.
To split the keyboard
1.
Select the main tone.
2.
Press the SPLIT button.
• This causes the indicator lamp above the button to
light.
3.
While holding down the SPLIT button, press the
tone button of the tone you want to use as the
split tone.
• While holding down the SPLIT button, you can also
press the VARIATION button to switch to the
variation of the split tone.
• The tone button lamp of the split tone you specify
flashes. The indicator lamp above the VARIATION
button also flashes when the variation tone is selected
for the split tone.
Split point (F
3)
Split tone Main tone
428A-E-018A
AP38_e_08-19.p65 02.6.12, 15:5514