Casio AP-38 Musical Instrument User Manual


 
E-4
Cleaning
Before cleaning the digital piano,
unplug it from the power outlet.
Failure to do so can damage the
power cord, creating the risk of fire
and electric shock. It can also cause
the digital piano to fall over, creating
the risk of personal injury.
Never climb onto the digital piano or stand.
Doing so can cause the digital piano
to fall over, creating the risk of
personal injury. Special care
concerning this item is required in
households where there are small
children.
Connector
Connect only the specified devices
to the digital piano's connectors.
Connecting non-specified items
creates the risk of fire and electric
shock.
Location
Avoid locating the digital piano in
the following types of areas.
Subjecting the digital piano to the
conditions described below creates
the risk of fire and electric shock.
Areas expose to high humidity or
large amounts of dust
Near food preparation areas and
other areas where it is exposed to
oil smoke
Near a heater, on a heated carpet,
in direct sunlight, inside a closed
automobile parked in the sun, and
any other area subjected to very
high temperature
CAUTION
Power Cord
Improper use of the power cord can
create the risk of fire and electric
shock. Always be sure to observe
the following precautions.
Never locate the power cord near
a stove or other source of heat.
When unplugging from an outlet,
never pull on the cord.
(Always grasp the plug when
pulling.)
After use turn off the power
switch of the instrument and
unplug the power cord from the
electrical outlet.
Power Plug
Improper use of the power plug can
create the risk of fire and electric
shock. Always be sure to observe
the following precautions.
Push the plug fully into the power
outlet as far as it will go.
Unplug from the power outlet
during lightening storms, and
when you do not plan to use the
digital piano for a long time (such
as before a long trip).
Unplug from the power outlet at
least once a year and clean any
dust build up between the prongs
of the plug.
Moving the digital piano
Be sure to perform the following
steps before moving the digital
piano. Failure to do so can damage
the power cord, creating the risk of
fire and electric shock.
1. Unplug the digital piano from its
power outlet.
2. Unplug the pedal connecting
cord, and all cords and other
items connected to the back of the
digital piano.
428A-E-008A
AP38_e_01-07.p65 02.6.12, 15:554