Filter
Top Products
E-31
* Whenever adding the keyboard channel number to a value
from 1 to 8 produces a result that is greater than 16, the
send channel used is the one whose number is equal to the
result minus 16.
❚
NOTE
• Pedal effect data recorded to memory is applied to play back
from song memory, and does not affect your performance on
the keyboard. Likewise, pedal operations on the digital piano
are applied to the keyboard only, and not to play back from the
song memory.
428A-E-035A
Simultaneous Receive Over
Multiple Channels (Multi-Timbre)
The Multi-Timbre mode makes it possible to assign the digital
piano’s built-in tones to MIDI channels 1 through 16. Then
you can simultaneously sound multiple channels to play from
a commercially available multi-track sequencer.
❚
NOTE
• See “Assigning Tones to Individual Channels” on this page for
details on assigning tones to each channel.
• Up to 16 channels can be received simultaneously (Channel 1
through channel 16).
• The number of channels to be received simultaneously cannot
be predetermined. If it becomes necessary to cancel a channel,
the cancel operation must be performed on the sending side.
Specifying the Keyboard Channel
The keyboard channel is the channel used when sending MIDI
messages to another MIDI device. You can specify any
channel from 1 through 16 as the keyboard channel.
To specify the keyboard channel
1.
While holding down the CONTROL button,
specify the keyboard channel by pressing one of
the keyboard keys shown in the illustration
below.
Example: Channel 8
• A note does not sound when you press a keyboard
key while holding down CONTROL.
❚
NOTE
• The keyboard channel is automatically set to 1 whenever you
turn on the digital piano power.
Assigning Tones to Individual Channels
You can assign tones to channels using a Program Change
message sent from a connected MIDI device. You cannot
change the tone assigned to each channel from the digital
piano.
❚
NOTE
• The GRAND PIANO 1 tone is automatically assigned to all
channels whenever you turn on the digital piano power.
Sending Song Memory Playback
Data
You can send song memory playback as MIDI data.
The send channel used depends on the keyboard channel
setting, as shown in the table below.
C
4
A
6
(black key)
B
7
Keyboard Play
Keyboard main tone data
Keyboard layer tone data
Keyboard split tone data
Main tone data inside of
Track A playback data
Layer tone data inside of
Track A playback data
Split tone data inside of
Track A playback data
Main tone data inside of
Track B playback data
Layer tone data inside of
Track B playback data
Split tone data inside of
Track B playback data
Keyboard Channel
Keyboard Channel
Keyboard Channel + 1*
Keyboard Channel + 2*
Keyboard Channel + 3*
Keyboard Channel + 4*
Keyboard Channel + 5*
Keyboard Channel + 6*
Keyboard Channel + 7*
Keyboard Channel + 8*
AP38_e_30-33.p65 02.6.12, 15:5531