Filter
Top Products
A-7
n .......... Voice Channel Number = 0H to FH (Ch1 to Ch16)
Recognition
Receipt of this message immediately mutes all tones playing over
the MIDI channels.
Reset All Controller
★
Format
n .......... Voice Channel Number = 0H to FH (Ch1 to Ch16)
Recognition
Receipt of the Reset All Controller message causes the following
controllers to be reset.
Controller Name Reset Value
Modulation Wheel vvH = 00H
Expression Controller vvH = 7FH
Hold 1 vvH = 00H
Portamento vvH = 00H
Sostenuto vvH = 00H
Soft vvH = 00H
NRPN msb = 7FH, lsb = 7FH
RPN msb = 7FH, lsb = 7FH
Pitch Bend Change llH mmH = 00H 40H
Byte 1 Byte 2 Byte 3
BnH 79H 00H
All Note Off
Format
n .......... Voice Channel Number = 0H to FH (Ch1 to Ch16)
Recognition
Receipt of the All Note Off message mutes all tones being played
by data received over the MIDI channels (note off).
If Hold 1 or Sostenuto is turned on when the All Note Off message
is received, notes are sustained in accordance with the
corresponding pedal operation.
Send
This message is sent when the CONTROL button is pressed and
when song memory playback is stopped.
Omni Mode Off
★
Format
n .......... Voice Channel Number = 0H to FH (Ch1 to Ch16)
Recognition
Receipt of an Omni Mode On message does not turn on the
instrument Omni Mode. Receipt of an Omni Mode On message is
treated as an All Note Off message.
Omni Mode On
★
Format
n .......... Voice Channel Number = 0H to FH (Ch1 to Ch16)
Recognition
Receipt of an Omni Mode On message does not turn on the
instrument Omni Mode. Receipt of an Omni Mode On message is
treated as an All Note Off message.
Byte 1 Byte 2 Byte 3
BnH 7CH 00H
Byte 1 Byte 2 Byte 3
BnH 7BH 00H
Byte 1 Byte 2 Byte 3
BnH 7DH 00H
n .......... Voice Channel Number = 0H to FH (Ch1 to Ch16)
vv ........ Number of Mono Mode Channels = 00H to 10H
Recognition
Receipt of a Mono Mode On message does not turn on the
instrument Mono Mode. Receipt of a Mono Mode On message is
treated as an All Sound Off message and All Note Off message.
Poly Mode On
★
Format
Byte 1 Byte 2 Byte 3
BnH 7EH vvH
Byte 1 Byte 2 Byte 3
BnH 7FH 00H
n .......... Voice Channel Number = 0H to FH (Ch1 to Ch16)
Receive
Receipt of a Poly Mode On message by the instrument sets Channel
n to Mode 3 and is processed as if an All Sound Off message and
All Note Off message were received.
Byte 1 Byte 2 Byte 3
BnH 78H 00H
Recognition
• The value llH mmH is 00H 00H at the lowest pitch, 00H 40H at
mid-pitch, and 7FH 7FH at the highest pitch.
• You have to set both the LSB and MSB together to form a 14-bit
value and make a Pitch Bend Change message recognized by
the instrument.
Channel Mode Message
All Sound Off
★
Format
Mono Mode On
★
Format
428A-E-091A
AP38_e_MIDI Data.p65 02.6.12, 15:567