Filter
Top Products
E-18
428A-E-022A
Using the Pedals
This digital piano comes equipped with the three pedals
shown in the illustration below.
Pedal functions
• Damper pedal
Pressing this pedal causes notes to reverberate and to
sustain longer. In the case of the PIPE ORGAN and
STRINGS tones, pressing this pedal sustains the notes
played until you release the pedal.
• Soft pedal
Pressing this pedal dampens notes and slightly reduces
their volume. Only notes played after the pedal is depressed
are affected, and any notes played before the pedal is
pressed sound at their normal volume.
• Sostenuto pedal
Like the damper pedal, this pedal causes notes to
reverberate and to sustain longer. The difference between
the two pedals is the timing when they are pressed. With
the sostenuto pedal, you press the pedal after depressing
the notes you want to sustain. Only the notes whose
keyboard keys are depressed when the sostenuto pedal is
pressed are affected.
❚
NOTE
• The following shows how pedal effects are applied during
different types of operations.
Soft pedal
Sostenuto pedal
Damper pedal
1
METRONOME
BEAT keys
2
METRONOME
VOL keys
3
TEMPO keys
4
Number Input keys
5
+
/
–
keys
• Under the power on default setting, pedal effects are not applied
to a split tone (page E-14). Perform the procedure below to
apply pedal effects to a split tone.
While you are performing
this type of operation:
Song memory recording
Song memory playback
Demo tune play
Music Library play
Pedal effects are
applied to:
Notes played on
the keyboard only
To apply pedal effects to a split tone
1.
While holding down the CONTROL button, turn
pedal effects on or off by pressing one of the
keyboard keys shown in the illustration below.
A0 : Pedal effects off
B
0 : Pedal effects on
• A note does not sound when you press a keyboard
key while the CONTROL button is depressed.
Using the Metronome
The metronome provides a reference beat that you can use
during your performances or practice sessions. You can
change the beat and the tempo of the metronome.
• The illustration below shows the keyboard keys you use
when configuring metronome settings. The names of the
settings are also marked above the keyboard keys to which
they are assigned.
C
4
B
0
: ON
A
0
: OFF
❚
NOTE
• A note does not sound when you press any of the above
keyboard keys while holding down the CONTROL button.
AP38_e_08-19.p65 02.6.12, 15:5518