Filter
Top Products
Recording and Play Back
E-31
1.
Press the RECORDER button so the PLAY
lamp is lit.
2.
Use the T/NO and S/YES buttons to display
a song number (1 to 5).
NOTE
• When a song has something recorded in both tracks, you
can turn off one track and play back just the other track,
if you want. Whether a track is on or off is indicated by
the lamps above the TRACK/PART button. Each press of
the TRACK/PART button cycles through the different
possible track on/off settings.
3.
Press the START/STOP button.
• This starts playback of the song and/or track you
selected.
NOTE
• You can change the tempo setting as a track is playing.
• You cannot change the tone setting during playback.
•Press the START/STOP button again to stop playback.
IMPORTANT!
• The procedure below deletes all of the data of the
selected song. Note that the delete operation cannot be
undone. Check to make sure you really do not need the
data before you perform the following steps.
1.
Press the RECORDER button so the PLAY
lamp is lit.
2.
Use the T/NO and S/YES buttons to display
a song number (1 to 5).
3.
Press the RECORDER button so the REC
lamp is flashing.
4.
Use the TRACK/PART button to select the
track you want to delete.
• This will cause the lamp of the selected track to flash.
5.
Hold down the RECORDER button until “dEL”
(delete) appears on the display.
6.
Press the S/YES button.
• This will delete the selected track and enter record
standby.
• To cancel the operation, press the T/NO button in
place of the S/YES button.
NOTE
• All digital piano operations except for the RECORDER
button and the T/NO and S/YES buttons are disabled
from step 5 until the delete operation is executed in step 6
of the above procedure.
To play back from digital piano
memory
To delete a specific track
PX320_e.book 31 ページ ２００７年８月１日 水曜日 午前９時２８分