Filter
Top Products
E-36
Other Settings
Pedals
MIDI and Other Settings
Setting Parameter Name Settings Description
Soft/Sostenuto pedal
jack setting
OTHERS J.SF: Soft
J.SS: Sostenuto
Soft pedal is the initial power on default setting for a
pedal connected to the digital piano’s SOFT/
SOSTENUTO PEDAL jack. This parameter can be used
to change the pedal to a sostenuto pedal. When
configuring the setting of this parameter, use the
procedure under “To change the setting of one of the
OTHERS button parameters” on page E-33.
Damper pedal
adjustment
(half-damper)
OTHERS H.00 to H.42 With optional SP-30 only
Adjusts the pedal effect applied when the damper pedal
is half-pressed as a value from 0 (no effect) to 42 (same a
full press). When configuring the setting of this
parameter, use the procedure under “To change the
setting of one of the OTHERS button parameters” on
page E-33.
Setting Parameter Name Settings Description
Send channel MIDI C.01 to C.16 Specifies one of the MIDI channels (1 through 16) as the
Send Channel, which is used for sending MIDI
messages to an external device. When configuring the
setting of this parameter, use the procedure under “To
change the setting of one of the MIDI button
parameters” on page E-33.
Accomp MIDI out MIDI o.oF: Off
o.on: On
Specifies whether or not MIDI messages should be sent
in accordance with the digital piano’s Auto
Accompaniment and recording function playback.
When configuring the setting of this parameter, use the
procedure under “To change the setting of one of the
MIDI button parameters” on page E-33.
MIDI In Chord judge MIDI J.oF: Off
J.on: On
Specifies whether chord judge should be performed on
accompaniment range MIDI Note On messages
received from an external device. When configuring the
setting of this parameter, use the procedure under “To
change the setting of one of the MIDI button
parameters” on page E-33.
Local control MIDI L.oF: Off
L.on: On
When Local Control is turned on, pressing the
keyboard’s keys plays the notes using the currently
selected built-in tone, and also sends the applicable
MIDI messages out the MIDI OUT port. Turning off
Local Control cuts off the digital piano’s sound source,
so no sound is produced by the digital piano when keys
are pressed. This capability comes in handy when you
want to turn off the digital piano’s keyboard and play
on an external sequencer or other device.
When configuring the setting of this parameter, use the
procedure under “To change the setting of one of the
MIDI button parameters” on page E-33.
Registration Filter OTHERS F.oF: Off
F.on: On
When Registration Filter is turned on, the rhythm and
Auto Accompaniment related settings are not recalled
when recalling registration data. For details about the
settings that are not recalled, see “Registration Data
Contents” on page E-25.
When configuring the setting of this parameter, use the
procedure under “To change the setting of one of the
OTHERS button parameters” on page E-33.
PX320_e.book 36 ページ ２００７年８月１日 水曜日 午前９時２８分