Filter
Top Products
E-28
Other Settings
Expanding the Number of Built-in
Tunes
You can transfer song data for up to 10 tunes (approximately 132
kilobytes) to digital piano memory and store it as Song Group tunes
number 30 through 39.
You can obtain a copy of the special CASIO conversion software
by downloading it at the Web page shown below. After
downloading, install the software on your computer.
CASIO MUSIC SITE
http://music.casio.com/
* In addition to the software itself, the CASIO MUSIC SITE
will also provide you with information about its
installation and use. You can also find out about how to
connect your computer and digital piano, the latest news
about your digital piano and other CASIO musical
instruments, and much more.
Deleting a User Song
Use the following procedure to delete a user song you have loaded
to digital piano memory from your computer.
1
Hold down the SONG/USER button until a user song
selection screen appears.
• To exit the selection screen, press the NO button.
2
Use the dial to select the song you want to delete.
3
Press the YES button to delete the song.
• The display should now show 0 kilobytes.
ML Us e r So n
g
De l e t e?
[
30: xxxxxxx
]
xxx KB
419A-E-030A
USB Mode and MIDI Mode
Your digital piano has two data communication modes: a USB mode
and a MIDI mode.
The USB mode is used when sending and receiving data via the
digital piano’s the USB port, while the MIDI mode is used for data
send and receive via its MIDI terminals.
USB Mode/MIDI Mode Switching
The digital piano will enter the USB mode automatically whenever
a connection is established between it and the USB driver running
on a connected computer. Any other time (when there is no USB
connection between the digital piano and a computer), the digital
piano is in the MIDI mode.
USB Mode
• If you connect to a computer via the USB port before turning on
power, the screen will show “USB” when you turn on power.
Note that the screen also will show “USB” and the digital piano
will enter the USB mode if you turn on power while there are
connections to both the USB port and the MIDI terminals.
• The “USB” indicator will appear for about one second to indicate
the USB mode whenever you connect to a computer via the USB
port while the digital piano is turned on.
MIDI Mode
• If you connect another device to the digital piano’s MIDI
terminals (only) before turning on power, the screen will show
“MIDI” when you turn on power.
• Disconnecting from the digital piano’s USB port while the digital
piano is turned on will cause the “MIDI” indicator to appear for
about one second to indicate the MIDI mode.
Ac t i ve Por t : USB 000 00000
0
Ac t i ve Po r t : MIDI00 0 00000
0
PX400R_e_17-28.p65 04.8.24, 4:34 PM28