Filter
Top Products
E-32
Using a Memory Card
419A-E-034A
Renaming a Memory Card File
You can use the procedure below to change the name of a file that
you previously saved to a memory card.
Getting Ready
• Insert the memory card that contains the file you want to rename
into the card slot. Make sure that the sticker is removed from
the card’s write protect area, which enables writing.
To rename a file on a memory card
1
Press the CARD FUNCTION button.
• This causes the indicator lamp above the button to light.
2
Use the dial to display the “Rename” screen.
3
Press the [̈] cursor button to advance to the file type
selection screen.
4
Use the dial to select the type of the file you want to
rename.
5
Press the [̈] cursor button to advance to the file name
selection screen.
6
Use the dial to select the name of the file you want to
rename.
7
Press the [̈] cursor button to advance to the file name
input screen.
• Use the dial to scroll through letters at the current cursor
location. For details about the characters you can input,
see “Supported Input Characters” on page E-33.
• Use the [̇] and [̈] cursor buttons to move the cursor left
and right.
8
After inputting the file name, press the EXECUTE button.
• This will display a confirmation message asking whether
you really want to change the name.
9
Press the YES button to change the file name.
• The message “Please Wait” will remain on the display
while the rename operation is being performed. Never try
to perform any other operation on the digital piano while
the card is being accessed. The screen in step 2 will
reappear after the rename operation is complete.
• If you do not want to continue with the rename operation,
press the NO button. This will return to the screen in step 7.
10
After you are finished renaming the file, press the CARD
FUNCTION button so its indicator lamp goes out.
Deleting a Memory Card File
Use the procedure below to delete a file from a memory card.
IMPORTANT!
• Note that the file delete operation cannot be undone. Make sure
that you no longer need data before you delete it.
Getting Ready
• Insert the memory card that contains the file you want to delete
into the digital piano’s card slot. Make sure that the sticker is
removed from the card’s write protect area, which enables
writing.
To delete a file from a memory card
1
Press the CARD FUNCTION button.
• This causes the indicator lamp above the button to light.
2
Use the dial to display the “Delete” screen.
3
Press the [̈] cursor button to advance to the file type
selection screen.
4
Use the dial to select the type of the file you want to
delete.
5
Press the [̈] cursor button to advance to the file name
selection screen.
6
Use the dial to select the name of the file you want to
delete.
7
After selecting the file to be deleted, press the EXECUTE
button.
• This will display a confirmation message asking whether
you really want to delete the file.
8
Press the YES button to delete the file.
• The message “Please Wait” will remain on the display
while the delete operation is being performed. Never try
to perform any other operation on the digital piano while
the card is being accessed. The screen in step 2 will
reappear after the delete operation is complete.
• If you do not want to continue with the delete operation,
press the NO button. This will return to the screen in step 5.
9
After you are finished deleting the file, press the CARD
FUNCTION button so its indicator lamp goes out.
PX400R_e_29-37.p65 04.8.24, 4:34 PM32