Filter
Top Products
E-33
419A-E-035B
Formatting a Memory Card
Use the procedure below to format a memory card.
IMPORTANT!
• Note that formatting a memory card that already contains data
causes all of that data to be deleted. Data deleted by the format
operation cannot be recovered. Before performing the procedure
below, check to make sure that the memory card does not contain
any data you might need.
Getting Ready
• Insert the memory card you want to format into the digital
piano’s card slot. Make sure that the sticker is removed from the
card’s write protect area, which enables writing.
To format a memory card
1
Press the CARD FUNCTION button.
• This causes the indicator lamp above the button to light.
2
Use the dial to display the “Format” screen.
3
Press the EXECUTE button.
• This will display a confirmation message asking whether
you really want to format the memory card.
4
Press the YES button to start formatting.
• The message “Please Wait” will remain on the display
while the format operation is being performed. Never try
to perform any other operation on the digital piano while
the card is being accessed. The screen in step 2 will
reappear after the format operation is complete.
• If you do not want to continue with the formatting
operation, press the NO button. This will return to the
screen in step 2.
5
After you are finished formatting the memory card, press
the CARD FUNCTION button so its indicator lamp goes
out.
Using a Memory Card
Supported Input Characters
The following shows the characters you can input when inputting
the name of a file being saved to a memory card.
PX400R_e_29-37.p65 04.8.24, 4:34 PM33