Filter
Top Products
E-7
Playing with Different Tones
Your digital piano has the following types of tones
built in.
* You can select these tones using keyboard keys. The
name of the tones assigned to each keyboard key is
marked above the keys. For details about selecting
these tones, see “Selecting a Tone Using the
Keyboard Keys” on page E-8.
1.
Press the POWER button to turn on the
digital piano.
IMPORTANT!
• When you turn on the digital piano, it performs a power
up operation in order to prepare its system. The power up
operation takes about 10 seconds, and is indicated by
the following messages appearing on the display.
2.
Select the tone you want.
z To select the GRAND PIANO tone, simply press the
GRAND PIANO button.
• To select another tone, find its tone name in the
“Tone List” on page A-1 and note its tone number.
Example: To select Tone Number 07, Harpsichord
•Use the + and – buttons to change the displayed
tone number until it matches the one you want (07
in this example).
NOTE
• There are two sets of tone numbers, one set from 01 to 12
and another set from 001 to 150. Pressing the + button
while 12 is displayed will change the tone number to 001.
Similarly, pressing the – button while 001 is displayed
will change the tone number to 12.
• Holding down either button changes the displayed value
at high speed.
3.
Use the VOLUME controller to adjust the
volume level.
4.
Try playing something on the digital piano.
POWER
VOLUME
GRAND PIANO
METRONOME
TEMPO/SETTING
TONE
/
Selecting and Playing a Tone
Tone Numbers Tone Type
Number of
Tones
01 to 12 Keyboard* 12
001 to 020 Various 20
021 to 148 GM (General MIDI) 128
149, 150 Drum Sets 2 sets
(Please wait!)
(Preparing system)
(Complete!)
PX800_e.book 7 ページ ２００６年１０月１２日 木曜日 午後１２時５分