Casio WK3000 Musical Instrument User Manual


 
E-99
9
After inputting the file name, press the [̄] CURSOR
button.
If you are saving song data, the file type selection
screen appears next. Use the [̇] and [̈] CURSOR
buttons to select SMF or SONG. After selecting a
file type, press the [̄] CURSOR button.
This will display a confirmation message asking
whether you really want to save the data. If you
already have data in the user area, the message will
ask if you want to overwrite the existing data with
the loaded data.
0
Press the YES button to save the data. This will cause
the message Pls Wait to appear on the display to
indicate that a card access operation is being
performed. Never try to perform any other operation
on the keyboard while the card is being accessed. The
message Complete will appear on the display after
data save is complete. After a few seconds, the message
will be replaced by the file name selection screen
.
If you do not want to continue with data save, press
the EXIT button or the NO button in response to the
above confirmation message. This will return you to
the user area selection screen in step 7.
A
After you are finished performing the save
operation, press the DISK/CARD button (CARD
button on the WK-3100/WK-3000) to exit the Card
Mode.
Loading a File
Use the procedures in this section when you want to load data
from external storage media into the keyboards user area.
IMPORTANT!
Note the following important points whenever using the SMF
Player Mode to play back data saved with the above procedure
.
* SmartMedia Card
To perform the procedure below, you must have a
SmartMedia card to which SMF data has been copied from
a computer. Insert a SmartMedia card that you have
formatted on the keyboard into the card slot of your
computer, and copy the SMF data you want to load into
the directory named CASIO_MD. Note that you will not
be able to load the data if it is not located inside the
CASIO_MD directory. If you create a sub-directory inside
of the CASIO_MD directory, the keyboard will not be
able to load any data inside the sub-directory.
* Floppy Diskette (WK-3500 only)
This keyboard is able to see only files that are in the top
(root) directory of the floppy diskette. It will not be able to
see any files that are located in a subdirectory.
PREPARATION
SmartMedia Card
Insert the SmartMedia card that contains the data you
want to load into the keyboards card slot.
Floppy Diskette (WK-3500 Only)
Insert the floppy diskette that contains the data you
want to load into the keyboards floppy disk drive.
NOTE
Depending on the type and the amount of data involved,
a SmartMedia card or floppy diskette (WK-3500 only)
data save or load operation can take anywhere from a
few minutes to more than 10 minutes to complete. The
message Pls Wait will remain on the display to indicate
that a data save or load operation is being performed.
IMPORTANT!
Never try to perform any operation while Pls Wait is
displayed. Performing any operation can cause Flash
memory or SmartMedia card or floppy diskette data to
be deleted, and damage the keyboards memory and
cause it to malfunction.
To recall file data from external storage media
1
What you should do first depends on the type of
external storage media you are using.
SmartMedia Card
On the WK-3500 press the DISK/CARD button twice. On
the WK-3100/WK-3000, press the CARD button once.
This causes a pointer to appear next to the DISK/
CARD or CARD on the display, and also displays
Card in the displays text area.
Floppy Diskette (WK-3500 Only)
Press the DISK/CARD button.
This causes a pointer to appear next to the DISK/
CARD on the display, and also displays Disk in
the displays text area.
2
Press the [̄] CURSOR button to display the Card
Mode (or Disk Mode) menu.
3
Use the [̇] and [̈] CURSOR buttons to display
the Load screen.
4
Press the [̄] CURSOR button to advance to the
file type selection screen.
5
Use the [̇] and [̈] CURSOR buttons to select the
type file you want to load.
6
Press the [̄] CURSOR button to display the file
name selection screen.
7
Use the [
̇
] and [
̈
] CURSOR buttons or [+] and []
buttons to select the name of the file you want to load
.
Saving Data
735A-E-101C
WK3100_e_89-105.p65 04.3.26, 0:12 PM99