Casio WK3000 Musical Instrument User Manual


 
E-104
Saving Data
735A-E-106B
SmartMedia Card Error Messages
Display Message Cause
Action
Err Card R/W
Err CardFull
Err No Card
Err Name
Err ReadOnly
Err Format
Err Mem Full
Err Not SMF0
Err No File
Err Protect
Err Convert
Err WrongDat
There is something wrong with the card.
The card is full.
1. The card is not set correctly in the card slot.
2. There is no card in the card slot or the card
was removed part way through a card
operation.
1. A file with the same name as the one you
are trying to use already exists.
2. You are trying to use a file name that is not
allowed by MS-DOS.
Attempt to save a file using the same name as
an existing file that is read only.
1. The format of the card is not compatible
with this keyboard.
2. The card is not formatted.
3. The card is damaged.
Keyboard memory became full while
importing data from card.
The file you are reading is not an SMF 0 format
file.
The keyboard cannot find any file it can read
on the card.
The card is write protected.
There is not enough memory to save data
produced by converting song data from SONG
format to SMF format.
The data on the card is corrupted.
Use a different card.
1. Use a different card.
2. Delete files you no longer need from the
card (page E-101).
1. Remove the card and reinsert it correctly
(page E-94).
2. Insert a card into the card slot. Never remove
a card from the card slot while a card access
operation is in progress.
1. Use a different name (page E-100).
2. Name files using the allowable characters
(page E-103).
Save the new file to a different card or use
another name.
1. Change to a card that has the proper format.
................................................................E-102
2. Format the card. ...................................E-102
3. Use a different card.
1. Delete data you no longer need from the
user area that corresponds to the file you
are trying to store.
2. If you have song data stored in Song
Memory (SG0 to 4), delete the song data
you no longer need. ...............................E-72
Use SMF 0 format files only.
Use a card that contains data stored by this
keyboard or compatible data from another
device.
1. Use a different card.
2. Remove the cards write protect sticker to
enable data storage. ...............................E-93
Delete SMFs you no longer need from your
SMF data (page E-80).
Use other data or another card.
WK3100_e_89-105.p65 04.3.26, 0:12 PM104