Filter
Top Products
E-47
735A-E-049B
What you can do with the Mixer
This keyboard lets you play multiple different musical
instrument parts at the same time during auto-
accompaniment play, song memory playback, receipt of data
through the MIDI terminal, etc. The Mixer assigns each part
to a separate channel (1 through 16) and lets you control the
channel on/off, volume, and pan pot parameters of each
channel.
In addition to channels 1 through 16, the Mixer also has a
DSP channel that you can use to adjust the DSP level, DSP
pan, and other DSP parameters.
Channel Assignments
The following shows the parts that are assigned to each of
the 16 channels.
Mixer Function
Channel
Part
Number
Channel 1 Main tone (UP1)
Channel 2 Layered tone (UP2)
Channel 3 Split tone (LOW1)
Channel 4 Layered/split tone (LOW2)
Channel 5 Harmonize Tone (HARM)
Channel 6 Auto Accompaniment chord part 1 (CHD1)
Channel 7 Auto Accompaniment chord part 2 (CHD2)
Channel 8 Auto Accompaniment chord part 3 (CHD3)
Channel 9 Auto Accompaniment bass part (BASS)
Channel 10 Auto Accompaniment rhythm part (DRUM)
Channel 11 Song Memory track 1 (TR1)
Channel 12 Song Memory track 2 (TR2)
Channel 13 Song Memory track 3 (TR3)
Channel 14 Song Memory track 4 (TR4)
Channel 15 Song Memory track 5 (TR5)
Channel 16 Song Memory track 6 (TR6)
NOTE
• In this manual, “Channel Number” matches the channel
numbers marked on the keyboard above the CHANNEL
buttons.
• The CHANNEL button name in the above table
corresponds to the text marked on the keyboard below
the CHANNEL buttons.
See page E-74 and E-75 for information on layered, split, and
layered/split tones.
See page E-61 for information on the song memory.
NOTE
• Normally, keyboard play is assigned to Channel 1. When
Auto Accompaniment is being used, each part of the
accompaniment is assigned to Channels 6 through 10.
• When this keyboard is being used as the sound source
for an externally connected computer or other MIDI
device, all 16 channels are assigned musical instrument
parts. The notes played over the channel selected by
operation under “Turning Channels On and Off” below
are shown on the displayed keyboard and staff.
Turning Channels On and Off
Press the CHANNEL buttons to toggle individual channels
on and off. Indicators on the display show the current on/off
status of each channel.
• Each press of a CHANNEL button toggles the applicable
channel on and off.
• The on/off status of each channel determines the on/off
status of the corresponding part for keyboard play, Auto
Accompaniment, and Song Memory playback.
• Changing to a different rhythm causes Mixer Settings for
channel 6 through channel 10 to change to the default
settings assigned to the new rhythm. These settings also
change to the defaults for the currently selected rhythm
pattern whenever you switch between the Intro, Normal,
Variation, Fill-in, and Ending patterns.
Channel on Channel off
WK3100_e_47-58.p65 04.3.26, 0:11 PM47