Filter
Top Products
E-87
Configuring Other Settings
To configure other settings
1
Select the file you want to play back.
• Perform steps 1 through 3 under “To play back an
SMF” to select a file.
2
Press the [̄] CURSOR button to display a screen
for selecting the part you want to play on the
keyboard (play along part).
• Use the [̇] and [̈] CURSOR buttons or the [+] and
[–] buttons to select the play along part.
• You can specify the part you want to play on the
keyboard (the play-along part) as a value in the range
of 1 through 16.
• After specifying a part, turn off the channel that
corresponds to the play-along part you selected. See
“Turning Channels On and Off” on page E-47 for more
information. Performing this step turns off the
applicable part so you can play it on the keyboard
along with the rest of the SMF playback.
NOTE
• Entering the SMF Player Mode initializes all parts by
turning on all Mixer Mode channels.
3
Press the [̄] CURSOR button to display the
playback mode selection screen. Use the [̇] and
[̈] CURSOR buttons or the [+] and [–] buttons to
select the playback mode.
You can select from among the following four playback
modes.
S1 : One file, one time
SL : One file, repeat
A1 : All files, one time
AL: All files, repeat
4
Press the [̄] CURSOR button to display the output
mode selection screen.
• Use the [̇] and [̈] CURSOR buttons or the [+] and
[–] buttons to select the output mode.
• You can select from among the following two output
types.
int : Keyboard’s built-in speakers
out : MIDI OUT
NOTE
• Layer, split, and Auto Harmonize are automatically turned
off in the SMF Player Mode.
735A-E-089B
Using the SMF Player
4
Use the [̇] and [̈] CURSOR buttons or the [+]
and [–] buttons to select the file you want to play.
• The name of the currently selected file appears in the
text area of the display. The playback mode is shown
in the number area of the display. The Tempo/
Measure area of the display shows the size of the file
in kilobytes.
5
Press the START/STOP button
• This starts playback of the selected file.
• The number area of the display shows the number of
the part to be played manually on the keyboard.
• You can use the TEMPO buttons to adjust the tempo
within the range of 30 to 255.
• You can turn channels 1 through 16 on and off,
regardless of whether file playback is in progress or
stopped. For more information, see “Turning
Channels On and Off” on page E-47.
6
To stop file playback, press the START/STOP button
again.
Adjusting SMF Playback Volume
The following procedure explains how to control the overall
volume of SMF data playback. You can adjust volume while
playback is stopped or ongoing.
1
Press the ACCOMP VOLUME button.
• This causes the “SMF Vol.” indicator to appear on the
display, along with a value that indicates the current
SMF volume setting.
2
Use the [+] and [–] buttons or the number buttons
to adjust the SMF volume.
• You can specify a setting in the range of 000
(minimum) to 127 (maximum).
• Pressing [+] and [–] at the same time returns the SMF
volume setting to 100.
• Note that this setting does not affect the volume of
the notes you play on the keyboard.
WK3000_e_74-88.p65 04.3.26, 0:11 PM87