Filter
Top Products
25
Getting Started Connections Basic Operations Specifi cations Troubleshooting
Effector Function Fader Start UtilityUSB
Specifi cations
ENGLISH
Specifi cations
n
AUDIO (0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms)
• PHONO inputs Stereo x 3 Unbalanced RCA terminal
Input impedance: 47 kΩ
Level: –40 dBV (10 mV)
Signal to Noise ratio: 89 dB
• CD inputs Stereo x 5 Unbalanced RCA terminal
Input impedance:
10 kΩ
Level: 0 dBV
Signal to Noise ratio: 100 dB
• Equalizer (LINE) Band x 3
Channel equalization adjustment range:
HI: –∞,–90 dB to +10 dB
MID: –∞,–90 dB to +10 dB
LOW: –∞,–90 dB to +6 dB
• RETURN inputs Monaural x 2 1/4" TS terminal
Input impedance: 10 kΩ
Level: –10dBV/0dBV (Default: –10dBV)
• MIC inputs Monaural x 2
MIC1: Balanced XLR connectors
(1: Ground, 2: Hot, 3: Cold)
MIC2: Balanced 1/4" TRS jack
(Tip: hot, ring: cold, sleeve: ground)
Input impedance: 5 kΩ
Level: –60 to –20 dBu
EIN: Less than –126 dBu (Rs = 150 Ω)
CMRR: More than 89 dB (1 kHz)
• Equalizer (MIC) Band x 2
Adjustment range: HI: –15 to +15 dB
LOW: –15 to +15 dB
• USB audio inputs
Stereo x 4 (monaural x 8) 24 bit, Fs: 44.1 kHz, 48 kHz, 96 kHz USB B
• MASTER output
Balanced: Stereo, balanced XLR terminal
(1: Ground, 2: Hot, 3: Cold)
DA converter: 32-bit 128x oversampling advanced segment converter
Load impedance: More than 600 Ω
Level: +4dBu (Max.: +24 dBu)
Frequency response: 20 Hz to 20 kHz (±0.5 dB)
THD: Less than 0.05%
Crosstalk: Less than –100 dB (1 kHz)
Unbalanced: Stereo RCA terminal
Load impedance: 10 kΩ
Level: 0 dBu (Max.: +20 dBu)
• REC output Stereo Unbalanced RCA terminal
Load impedance: 10 kΩ
Level: –10 dBV (Max.: +10 dBV)
• BOOTH output Stereo
Balanced 1/4" TRS terminal
(Tip: hot; ring: cold, sleeve: ground)
Load impedance: More than 600 Ω
Level: +4 dBu (Max.: +24 dBu)
• SEND output Monaural x 2
Unbalanced 1/4" TS terminal
Load impedance: 10 kΩ
Level: –10 dBV (Max.: +10 dBV)
• Headphones output Stereo
Load impedance: 40 Ω
Level: 150 mW
• Digital coaxial output Stereo RCA terminal, IEC958 Consumer
(Fs: 44.1 kHz, 48 kHz, 96 kHz)
• USB audio output Stereo x 4 (monaural x 8) 24 bit, 44.1 kHz, 48 kHz, 96 kHz USB B
n
GENERAL
USB MIDI I/O: IN: 1ch, OUT: 1ch MIDI1.0, MIDI Clock USB B
MIDI OUT: OUT: 1ch MIDI1.0, MIDI Clock 5pin DIN
Channel level meters: PPM 16-point LEDs from –40 to +10 dB, peak display
Cue master level meters: PPM 16-point LEDs from –40 to +10 dB, peak display
Channel Fader: 60 mm Slim Type fader
Crossfader: 45 mm FLEX Fader (Fader Torque Adjustable)
Dimensions:
320(W) x 357(D) x 91(H) mm (12”5/8 (W) x 14”1/16 (D) x 3”5/8 (H))
Weight: 6.2 Kg (13.7 lbs)
Supply voltage: AC 120 V, 60 Hz (U.S.A. and Canada models)
AC 230 V, 50 Hz (European models)
Power consumption: 34 W
Operational temperature: +5ºC to +35ºC (+41 F to +95 F)
Operational humidity: 25% to 85%
Storage temperature: –20ºC to +60ºC (-4 F to +140 F)
369
357 (
14”1/16)
320 (
12”5/8)
113
91 (3”5/8)
unit mm (ins.)
z
For purposes of improvement, specifi cations and design are subject to change without notice.