Filter
Top Products
34
This cabinet is the main component in a XLC line array.
Starting with a minimum of four cabinets, a reasonable array
size uses six to eight boxes, up to a maximum of 16 for larger
arenas. The three-way axis-asymmetric design includes a single
EV DL-12 low-frequency/mid-bass woofer optimized for this
cabinet. Two 6.5” horn-loaded drivers in a vertical array cover
the mid-frequency bandpass.
The XLC127+ utilizes two ND6 (3” voice-coil) neodymium
compression drivers loaded on two Hydra™ plane wave gener-
ators. With a horizontal coverage of 120°, the XLC system
accurately covers wide ar
eas while maintaining excellent imag-
ing and lobe-fr
ee coverage. The XLC127+ is equipped with an
internal x-over for mid-bass and high-frequency to allow for
either biamp or triamp operation. This cabinet is also available
with dedicated rigging for fixed installations as XLCi 127+.
The X
LC
SYSTEM
The XLC 118 is a direct radiating design using the legendary
EVX180B 18-inch woofer
. The XLC 118 includes the same rig
-
ging and has 1.5 times the height of the XLC127 main cabinet.
This allows a hang of XLC118s to be flown beside the main
hang at a 3:2 ratio, maintaining aesthetic r
equir
ements for
equal hang heights. Flying subwoofers benefits in a more even
front-to-back SPL distribution, compared to a “classical”
ground stack. Also available as XLCi 118, for fixed installations.
X
LC
118 / X
LCi
118
Subwoofer
X
LC
127+ / X
LCi
127+
Main Cabinet
While the flagship X-Line meets the acoustical needs of the
largest venues and arenas, EV’s compact line-array, X
LC
, was
designed to match the demands for easy setup and transporta-
tion combined with outstanding sonic results in a large variety
of venue sizes.
SYSTEM FEATURES:
• Wide, constant horizontal coverage pattern of 120°
• Four-way system; bi- or tri-ampable fullrange cabinets
• Rigging hardware totally integrated into cabinets
• Front rigging/rear aiming concept enables precise
control of vertical line source pattern