Filter
Top Products
9
EVID 3.2/3.2T
• Two-way full range
• Vented LF enclosure
• 0.75" voice coil (titanium diaphragm) with Neodymium
magnetic structure
• Full-bandwidth overload protection for HF and LF
• Three-dimensional ellipse (for compact look)
• Magnetically shielded for video applications
• Comes with Strong Arm Mount (SAM™) and a hex key
• Suspension insert for SAM™; safety point on rear side
EVID 6.2/6.2T
• Two-way, high-output full range
• Vented LF enclosure
• High sensitivity
• 1" voice coil (titanium diaphragm) with Neodymium
magnetic structure
• HF section features Coherent Coverage Waveguide™
to minimize interference
• Full bandwidth overload protection for HF and LF
• Three-dimensional ellipse (for compact look)
• Magnetically shielded for video applications
• Comes with Strong Arm Mount (SAM™) and a hex key
• Suspension insert for SAM™; safety point on rear side
EVID 4.2/4.2T
• Two-way full range
• Vented LF enclosure
• 1" voice coil (titanium diaphragm) with Neodymium
magnetic structure
• HF section features Coherent Coverage Waveguide™
to minimize interference
• Full bandwidth overload protection for HF and LF
• Three-dimensional ellipse (for compact look)
• Magnetically shielded for video applications
• Comes with Strong Arm Mount (SAM™) and a hex-key
• Suspension insert for SAM™, safety point on rear side
EVID 12.1
• Subwoofer
• Slot-loaded port design
• Dual-voice-coil, high-excursion transducer
•
High sensitivity
• Built-in stereo crossover with high-pass output
• Trapezoidal
• Comes with mounting bracket (passed EIA 636 at
a safety factor of 8:1) for on-wall or corner mounting
• One safety 3/8"-16 eyebolt included
•
Suspension inserts and 2 x 3/8" hanging inserts
• Powered version (120v only) available
EVID 3.2/T
EVID 4.2/T
EVID 6.2/T
EVID 12.1
Frequency response (-10 dB) 85 Hz–20 kHz 65 Hz–20 kHz 62 Hz–20 kHz 40 Hz–140 Hz
Sensitivity (SPL 1 W/1 m) 87 dB 89 dB 94 dB 100 dB
Max. SPL/1m (calc.)
112 dB 115 dB 122 dB 128 dB
Long-term power handling 75 W 100 W 150 W 175/175 W
Short-term power handling 300 W 400 W 600 W 700/700 W
Transformer taps 70V: 5 W 70V: 3.75 W 70V: 7.5 W —
(transformer version only) 100V: 10 W 70V/100V: 7.5 W, 15 W, 30 W 70V/100V:15 W, 30 W, 60 W —
Coverage (H° x V°) 140° x 100° 120° x 80° 100° x 80° —
LF driver 2” x 3.5" 2” x 4" 2” x 6" 12"
HF driver 0.75" 1" 1” —
Nominal impedance (non-transformer version) 8 8 8 8
Minimum impedance (non-transformer version) 6 6 6 6
Input connections spring terminal spring terminal spring terminal spring terminal
Dimensions (H x W at front x D) 234 x 127 x 165 mm 310 x 175 x 216 mm 419 x 228 x 298 mm 412 x 584 (at front) x 305 mm
9.2" x 5.1" x 6.5" 12.2" x 6.9" x 8.5" 16.5" x 9" x 11.75" 16.25" x 23" x 12"
Net weight (incl. mounting bracket) 1.5 kg (3.3 lbs) 3.9 kg (8.5 lbs) 5.3 kg (12 lbs) 18.1 kg (40 lbs)
Shipping weight (pair) 3.9 kg (8.6 lbs) 8.6 kg (19 lbs) 12.3 kg (27 lbs) 20 kg (48 lbs)