Filter
Top Products
Euphonix System 5 Installation Guide System 5 Overview
13
Firewire
Each DF64 Digital Frame requires an PC254d Digital Pilot computer. These computers re-
quire no user interaction and configure the individual DF64s on startup. Each are connected
to their respective DF64s via firewire.
TCC Control
The PC254i Interface computer also requires no user interaction. It connects to the MC524
Monitor Interface and up to seven ML530 Mic/Line Interfaces via TCC connection.
Machine Control
The TT007 provides machine control of three serial 9-pin devices, MTC, and LTC. The
TT007 connects via MIDI in and out to a MOTU MIDI I/F. This interface is connected to
the PC254i Interface Computer, MMC, LYNX Net, and ESBus via the parallel port.
GPIO Control
The GP132 provides GPIO control for the system. The GP132 connects via MIDI in and
out to a MIDI Interface (supplied). This interface is connected to the SC262 system com-
puter, MMC, LYNX Net, and ESBus via the USB port.