Filter
Top Products
Euphonix System 5 Installation Guide System 5 Components
71
TT007
Setup
Connect the IEC power cable (included) to your studio power. Then connect MIDI Port 2
In and Out on the TT007 to MIDI Port 1 In and Out on the System 5 MIDI Interface.
Capabilities
The TT007 is an optional rack-mount device that provides machine control for all Eu-
phonix consoles. The TT007 allows the console to become the single, centralized machine
control hub within any studio. Virtually every machine, in or out of the control room, can
be remotely controlled from the console at the press of a button. The flexibility gained from
the addition of the TT007 is unprecedented. These are a few of the many features that can
be seamlessly implemented with the TT007:
• Entire machine networks can be configured and set into motion directly from
the console.
• user nameable, instantly accessible locate points
• automatic transport cycling
• jogging and variable shuttle
• control tape decks, DAWs, and other synchronizers
All timecode formats and frame rates are supported, including MIDI Time Code (MTC)
and external video sync. MIDI Machine Control (MMC), the TimeLine Lynx™ network,
and Sony 9-pin (P2) protocols work right “out of the box” to insure that starting to work
with the TT007 is quick and easy. Three MIDI and three serial machine ports are available.
The TT007 also has a built-in timecode generator and LTC reader.