Filter
Top Products
Euphonix System 5 Installation Guide System 5 Components
61
FC726 Format Converter
Figure 3-28 FC726 Front and Rear Panels
The FC726 Format Converter provides 56 sample-rate selectable, AES/EBU inputs and
outputs. It also allows direct connection to the following third-party digital formats: TDIF,
SDIF-2, and ADAT Optical.
Power Connector (IEC): Accepts standard IEC power cord (provided). An autoranging
switching supply accepts voltages between 100–240 VAC, 50–60 Hz.
Format A Common Connectors (seven DD-50): Connects to third-party devices. Each
connector provides eight bidirectional channels. Appropriate adapters must be used for
each format to connect the third-party devices. Specify cable requirements at time of order.
See Table 3-8 through Table 3-11 for pinout specifications.
Format A AES Connectors (seven DB-25): Connects to AES devices. Each connector
provides eight bidirectional channels (four AES pairs). Specify cable requirements at time
of order.
MADI A In 1 / MADI A Out 1 (two BNC): The MADI A In/Out Ports interface with non-
Euphonix MADI devices. At 48 kHz, MADI A provides 56 channels of 24-bit audio; at
96 kHz, 28 channels of 24-bit audio channels (cable not provided).
Format A AES Sync In (female XLR): Connect an AES Sync signal to this XLR connector
to synchronize the Format A MADI signal. According to the AES specification, to operate
correctly the AES sync signal must use the same sample rate as the incoming MADI signal
(cable not provided).
FC726
EUPHONIX, INC.
PALO ALTO
MADE IN THE U.S.A.
AES 49-56 AES 41-48 AES 33-40 AES 25-32 AES 17-24 AES 9-16 AES 1-8
SERVICE
IN
IN
AES
SYNC
AES SYNC
WORD SYNC
IN
OUT
FORMAT B
MADI A
MADI B
IN 2
OUT 2
IN 1
OUT 1
IN
CH 49-56 CH 41-48 CH 33-40 CH 25-32
CH 17-24 CH 9-16 CH 1-8
SDIF-2 SYNC
or
SLAVE CLK
OUT
FORMATA
OUT
VAC FUSE
100-240 1.0-0.5A 2.5A
50/60Hz SLOW
CURRENT
FMT A FMT B
AES STEREO
AES MONO
FMT A AES/FMT B/FMT A
IN THRU
SLAVE CLK
CAUTION: T
o prevent risk of fire
replace fuse with the same type and rating,