Filter
Top Products
27
Configuration Files and Presets
Before you start exploring the features of FlashMic Manager, it is important to
understand some basic terminology and the concepts behind the use of presets.
Various parameters of the FlashMic’s operation can be changed with FlashMic
Manager. A set of parameters is called a preset, and the FlashMic can hold up to
9 presets at any time.
The FlashMic user can select whichever is appropriate for the recording application
using the menus.
A set of 9 presets is saved as a configuration file within the computer, and you
may create and name as many configuration files as you need. Configuration files
are saved with a .cfg filename extension. The entire configuration file will then be
uploaded into the FlashMic, giving it its 9 presets.
The FlashMic parameters which can be defined in a preset by FlashMic Manager
are the following:
PARAMETER VALUES USER ALTERABLE*
Preset Name 6-character text string No
Record Mode File type & sample rate Yes
Pre-record Buffer 0 to 10 seconds. No
Record Level 8 steps from 5dB to 40dB Yes
High-pass Filter In/Out Yes
Backlight 3 options No
Filename 31-character text string No
Battery Display
Characteristic
Alkaline or rechargeable Yes
* Parameters marked ‘Yes’ can be subsequently changed within the FlashMic by the
user, provided that Configuration Changes were enabled in FlashMic Manager at
the time of configuration file creation.